To give your home that extra special look, several configurations are available. For the front of your home, choose from a simple door with single or double sidelites or even a double door. Also, you could opt for a garden door that opens to your backyard with a sliding screen.
Each of these options allow for a transom to be installed above your door. These transoms can be rectangular or any shape you desire. With our steel doors’ versatility, you can add your own special touch to your home.
Nothing is left to chance. The sophisticated, elegant design and the attention to detail during assembly give your door the personality you desire. Personalize your home with a richly coloured door combined with one or two sidelites. Add an exceptionally designed stained glass and you start to see the unlimited possibilities we can offer.
The assembly design and solid jointing simplify the door installation under any conditions. The frame’s screw assembly, done by our specialists, ensures a sturdiness truly appreciated by installers since it provides them a considerable time-saver…
Our impressive choice of combinations lets you choose the door model, glass, frame cladding and colour. The only limit is your imagination.
Panels N700, the superior line.
Higher definition embossments. No need for elevated molding. Increased thermal value.
Optionally, our steel doors and frame cladding (both extruded aluminum and PVC) are painted in our factory by a sophisticated and proven process. We apply 2 (PVC) to 3 (steel and aluminum) coats of high quality acrylic polyurethane paint offering unmatched resistance and luster.
At our factory, our colorists can do for you the colour of your choice, leaving free rein to your imagination.
Here are a few examples of popular colours:
322
Bright red
430
Pure white
502
Ivory
506
Smoke
508
Sand
514
Cashmere
523
Coal
525
Black
536
Graphite
538
Coffee
540
Vanilla
542
Ocean blue
547
Sandy
554
Waltnut-brown
556
Forest green
559
Khaki
562
Commercial brown
5P3
Expresso
5P5
Graphite
5P6
Iron ore
For superior resistance and luster, our claddings in extruded aluminum are certainly the ultimate choice to clad your frames. The thickness of our extrusions (1.78 mm) is much higher than the aluminum flat stock offered on the market.
Our extrusions are painted and baked in our oven ensuring a more resistant finish quality.
We can also provide you with a PVC factory painted exterior finishing molding.
Sturdy wooden door sill cladded with extruded aluminum (1,78 mm) and a 6 degrees slope. Thermal break that offers ultra-efficient water evacuation.
 |
A superior energy performance!In addition to the Energy Star® standard, which is used to assess the energy performance of your windows and doors, we also recommend that you consult the harmonized North American Fenestration Standard (NAFS), more commonly referred to as "structural performance testing". The NAFS standard evaluates a window or door's resistance to climatic elements such as wind, as well as its air and water tightness. In Canada, the minimum requirements of this standard are specified according to your locality, and are based precisely on your region's climatic conditions. Before purchasing your product, we strongly suggest that you validate the minimum performance category (PC) required by both your geographical location and the immediate surroundings of your home (location, product height, type of terrain, etc.). Find your minimum PC easily with Fenestration Canada's Performance Calculator. |
To reduce energy consumption, Martin uses as standard energy efficient Low-E glass (4.2) with Argon gas combined to an air-tight spacer. Many of our products are ENERGY STAR® approved.
The Sungate® 400 Low-E and argon energy efficient glass unit increases your comfort in many ways. This superior quality glass keeps you warm during winter’s cold nights and cool during the hot summer days. While allowing in the benefits of natural light, it also ensures a high level of energy efficiency.
The best warm edge spacer in the world:
Swisspacer Ultimate
It has the best thermal value in the world with a 20% reduction in thermal conductivity compared to the best product currently available on the market.
The MSA-1 Confor-Air door is delivered with all the hardware needed. It has reinforced aluminum corners, triple-pivot hinges and an extruded aluminum frame (2 x 7/8 inches).
• Baked enamel paint (Standard colour: White, Optional: painted same colour as your steel door and your frame cladding, see PAINT tab)
• Horizontal and vertical extensions
• Adjustable pneumatic door closer
• Lockable handle on the inside
• Fiberglass mesch
• Framing and extensions with synthetic fibre insect shield on the entire contour
• Decorative plate
• Decorative corners (Decora)
• 1 1/2 inch central division bar
• 7 inches aluminum kick panel
 |
 |
For a distinctive style and a very special design, add wood or aluminum simulated divided lites on both sides of your sealed units. Our contemporary and traditional models will be a wonderful complement to your products specially crafted according to your personal choice of sizes and configurations.
For a distinctive style and a special design, add PVC SDL on both sides of your sealed units (with or without spacer).
• 1 1/2 and 3/4 inch PVC made
Personalize your windows with a variety of models and colours of grilles inside the sealed glass unit.
| Tubular: | White, Brass, Pewter, Grey, Black | |
| Georgian: | 5/8 inch | White, Ivory, Brown, Sand, Pewter, Brass |
| 1 inch | White | |
| Rectangular: | 1 inch | White |
| 5/8 inch | White, Ivory, Brown, Pewter |
Here are a few exampes available.
An option that can be matched with the exterior finish trim of your Martin windows.
• 1 3/4 X 1 1/8 inch pine exterior finishing mouldings with a false shelf of 11/16 inch
• 3 1/2 X 1 1/8 inches pine exterior finishing mouldings
• Exterior finishing mouldings 1 3/4 X 7/8 inch with 1,27 mm thick extruded aluminum
• Exterior finishing mouldings 3 1/2 X 1/16 inches with 1,27 mm thick extruded aluminum
• 1 1/2 X 1 3/16 inch PVC exterior finishing mouldings
• 4 X 1 5/16 inches PVC exterior finishing mouldings
Our 3-point automatic multipoint locking system comes from a new European technology combined with a North American locking system. This system is offered as standard on all our wooden entry doors.
Martin Windows and Doors offer a wide variety of glasses and distinctive stained glasses that can both bring elegance to your door and create an atmosphere in your home.
 |
STAINED GLASSChoose a door with stained glass and add a little touch of fantasy with a private, semi-private or clear finish.*
|
 |
THERMACRYSTALThis new molding process produces designs with complex, pure lines and allows for the reproduction of different glass textures.*
|
 |
SILKSCREENThis family of products is characterized by a process that applies ink to the glass surface, giving it a decorative appearance while maintaining your privacy.*
|
 |
TEXTURED OR V-GROOVEDOur grooving process uses an engraving technique on sandblasted or glue chip tempered glass, allowing in light while maintaining your privacy.*
|
* Many possible configurations.
The raised panels made with extruded aluminum appliqué give your home a refined appearance.
• front steel doors
• double steel doors
Take a look at our brochure featuring all our wood products, crafted with care and passion...
DOWNLOAD OUR BROCHURE
